Red Dragon Armoury Synthetic Sparring Longsword, Silver
The blades are designed to flex in the last one-third of their length towards the tip, allowing for much safer thrusting than with conventional wooden wasters or shinai. The blade/tang joint is reinforced by a high tensile steel rod running along the full length of the handle, so removing the handle flex typically associated with plastic training swords. These synthetic-bladed swords also provide an excellent option for Theatrical use, being inherently safer than steel or aluminum. The variety of interchangeable parts offered by Red Dragon also provides an economical means to create many different styles of sword on a single blade. The ball shaped quillon finials and rounded pommels of the longsword and single-hand sword are designed for sparring safety, as are the pommel and basket of the basket-hilt sword. The grips are manufactured from a rubber-like thermoplastic elastomer, designed to absorb the impact of strikes and to provide a tight fit on the tangs. These synthetic-bladed swords also provide an excellent option for Theatrical use as well.
Whetstone Cutlery William Wallace Medieval Sword with Sheath, Silver
Reclaim your FREEDOM from the tyrannical English king with this authentic William Wallace sword! This sword is a replica of the sword William Wallace wielded in the movie Braveheart. The blade is made of polished stainless steel and is double edged. The hilt and pommel are composed of polished metal and the handle is wrapped in leather. The sword comes complete with an authentic rough leather sheath that includes a strap to attach this 40.75 inch sword to your belt.
Auwiy Hand Forge Carbon Steel Chinese Sword Long Handle KangXi Sword with Pearwood Sheath
Friendly reminder: The product dimension is hand-measured, might not be that accuracy. Color may not appear exactly as in real life due to variation between computer monitor resolution and lights. For the adults over age 18 and DISPLAY ONLY
Authentic Battle Ready Viking Long sword
The Authentic Battle Ready Viking Longsword comes with a wooden scabbard with leather wrap. The leather is stitched and each scabbard is hand made to fit the sword. Steel fittings on the throat and base make the scabbard durable, even when weighted by the sword. It fits into most Medieval longsword frogs. Inside the scabbard is a soft lining that will absorb fluids from the blade and keep the oil spread smoothly. Oil and cleanliness of the sword is important to prevent rust from occurring on the high performance carbon steel. Please keep your sword oiled and clean from moisture for maximum performance. This sword comes with a dull edge for safety and reenactments. It can be professionally sharpened for use in combat or practice. Note Sword Frogs item Numbers IN6508 and IN6507 are not Included. Because of the High Carbon content, you may notice occasional rust on the blade and scabbard throat, please use steel wool to clean. Item is sold as is. *Please note that due to the carbon steel construction of this handmade sword, there may be slight imperfections including some rusting on this item. This rust is easily removable and should not deter from the long term value of this item. Further rusting can be avoided by proper maintenance of the blade. Please Note: Frog is not included.
Cold Steel MAA Italian Long Sword
Historically, the Long Sword featured a distinctive cruciform hilt and a long, double edged blade that was equally adept at opposing both light and heavily armored foes. Its extra-long blade offered the reach and leverage for powerful stabbing, cutting and chopping strokes while its long cross guard and heavy pommel were useful for hooking, striking and smashing. When heavy plate armor was encountered, strikes with the edge were often abandoned in favor of a “Half-Swording” technique; where one hand grips the hilt and the other the blade for grappling and in-fighting - to better direct the point in powerful jabs, and to accurately thrust at the small gaps and joints in a suit of armor.
The Crecy Medieval War Full Tang Tempered Battle Ready Handmade Sharp Edge Sword
The Crecy was one of the most decisive battles of the 100 Years War. After the battle of Sluys, Edward III landed in Normandy in July 1346 with about 10,000 men. The French pursued. Edward III decided to halt near Crecy in Normandy and to prepare for battle the next day. However, the French vanguard made contact and started to attack without the benefit of a plan. The French made as many as 15 attacks and the English checked each one in turn, primarily thanks to the English long bowmen. In the end, the French were decimated and the English had a decisive victory. The Crecy is one type of sword that would have seen service on both sides during the 100 Years War. Oakeshott describes the Type XVIa as having a long, tapering blade, broad at the hilt, with a sharp, often reinforced, point. The Crecy is a fine example of a later period epee de guerre, or war sword, a refinement of the earlier XIIa in response to changes in the armor of the period.
Knights Templar Sword with Plaque
This classic medieval style sword features a stainless steel 36" blade with intricate etching. The cast metal handle, guard, and pommel offer Knights Templar imagery that enhances the overall appearance of this fine collectible item. This sword measures 47" overall in length and includes hardwood display plaque for presentation of the item. Tomahawk, XL1114
German Bastard Full Tang Tempered Battle Ready Hand Forged Sword *SHARP EDGE BLADE*
This sword is a perfect replica of these swords lasted from roughly 1350 to 1550, declined in the late 16th century, and they were obsolete by the early 17th century. In modern use, the term "bastard-sword" refers to a specific sort of longsword, most commonly a compromise between the smaller one-handed arming sword and larger two-handed sword that was primarily used in "cut and thrust" type of sword play. Typically, the bastard sword was heavy enough for battlefield use, while still being light enough for the quick moves found commonly in cut-and-thrust fighting and/or dueling. This compromise is accomplished by a distal taper of the blade, and a carefully balanced pommel and grip. Like many German swords it is primarily a cutting sword, with a wide blade that has a flattened oval cross section that gives very little resistance in a cutting blow. It is also a perfect example of a true hand-and-half or bastard sword. The proportions of the sword are that of a one handed sword, but with a slightly longer grip and a pommel shape that will allow two hands to be used by gripping both. The grip is wood covered in cord and leather. The long quillion has a decorative finial on the end and the side rings provide good hand protection. Antiqued steel parts to match the original.
Cold Steel Hand and a Half Training Sword 92BKHNH
The best of the world's sword fighters have known a simple truth for ages.. if you want to become a reasonably good sword fighter you should endeavor to learn sword fighting techniques, footwork and the basic stances. However, if you want to be a master at sword fighting you have to eventually start fighting with a "live blade". If your ultimate goal is to wield a razor sharp sword safely and effectively, you need to train with a sword that approximates the size, feel and heft of a live blade, yet minimizes the possibility of causing grievous, permanent, or life-threatening injury to yourself or your training partner. Made of polypropylene. Closely resembles the "live blade" in terms of weight and size. While they're not quite as rigid as wood, they have the advantages of being virtually unbreakable and remarkably stiff and cut resistant. This training aid will not rot, crack split or splinter. Minimizes the possibility of causing grievous or permanent injury to those who used it.
Medieval Crusader Holy Cross Knights Templar Long Sword Carbon Steel
Original Long Swords from the early A.D. and Middle Age were studied and researched as a bases for reproduction. Each Knights Templar Long Sword is hand made by professional metal-smiths that pride their work put into each sword. Raw Materials were hand selected for the specific purpose of producing the most accurate functional Knights Templar Long Sword. It is built to reflect the original swords from the period. From the blade steel to the sewn scabbard wrap, everything has been analyzed for optimum reproduction.
Medieval Knight Arming Sword with Scabbard (Chivalry Golden Ring)
The blade is left unsharpened for safety purposes, the the tip is slightly sharpened. The blade also has a ridge that runs down the center of the blade. . The handle is made in a ribbed design for a great grip and a black imitation leather wrap for comfort. The pommel is made from solid steel and it helps to balance the weight of the sword. The pommel also has an ornate design with silver fittings. The scabbard that comes included is made from wood and also has a black leather imitation wrap to coordinate with the design of the rest of the sword. The drag is made in a ball point design and is made from polished 440 Stainless Steel. The scabbard's throat is made from 440 Stainless Steel and has a V cut to fit tightly with the guard of the sword. This is not a full tang sword -a display item only
Red Dragon Armoury Synthetic Sparring Longsword - Black Blade & Hilt
This sword features: black blade, black guard, black handle, black pommel. The blades are designed to flex in the last one-third of their length towards the tip, allowing for much safer thrusting than with conventional wooden wasters or shinai. The blade/tang joint is reinforced by a high tensile steel rod running along the full length of the handle, so removing the handle flex typically associated with plastic training swords. These synthetic-bladed swords also provide an excellent option for Theatrical use, being inherently safer than steel or aluminum. The variety of interchangeable parts offered by Red Dragon also provides an economical means to create many different styles of sword on a single blade. The ball shaped quillon finials and rounded pommels of the longsword and single-hand sword are designed for sparring safety, as are the pommel and basket of the basket-hilt sword. The grips are manufactured from a rubber-like thermoplastic elastomer, designed to absorb the impact of strikes and to provide a tight fit on the tangs.These synthetic-bladed swords also provide an excellent option for Theatrical use as well. Overall: 48.5" blade length: 38" handle length: 10 1/4" weight: 1lb 12oz point of balance: 6"
Long Swords: find, shop, buy, compare
Look at our great selection of heavily discounted Halloween costumes, discounted costumes masks, accessories, props and Buy Halloween Costumes at Low Wholesale Prices. Find Costumes deals and save on June 16, 2019.